Toyota Century PCD

2017–2024

VERIFIED

Centre bore60.1 mm

Offset (ET)ET32 to ET40

Fixing typeEcrous - 14x1.50

Tightening torque140 Nm

Original tyres225/55R18, 225/50R20

Hub centric rings 60.1 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Century

A Toyota Century (2017–2024) uses a 5x120 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET32 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/55R18, 225/50R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x120	60.1 mm	7.5Jx18	ET32	225/55R18
Version 2	5x120	60.1 mm	—	ET40	225/50R20

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Century without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Mirai 2014–2021 Lexus TX from 2023 Lexus LC from 2017 Lexus LS from 2017 Lexus LS460 2006–2010 Lexus LS600 2006–2017

Will wheels from another vehicle fit your Century?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Toyota Century?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Lexus TX from 2023 Wheels from Lexus LC from 2017 Wheels from Lexus LS600 2006–2017

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 60.1 mm, and will not fit if it is smaller.

Nio EL6 ⌀62.6 VinFast VF6 ⌀74.1 VinFast VF8 ⌀74.1 VinFast VF9 ⌀74.1 BYD Han ⌀64.1 BYD Seal ⌀64.1 Land Rover Range Rover V ⌀72.6 Lotus Eletre ⌀63.4

Frequently asked questions

What is the PCD of a Toyota Century?

A Toyota Century (2017–2024) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Toyota Century need a hub centric ring?

The centre bore (hub diameter) of a Toyota Century is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Century?

The recorded original offset is ET32 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Century?

The specified tightening torque is 140 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Century?

With the same PCD (5x120) and the same centre bore (60.1 mm), these include: Toyota Mirai, Lexus TX, Lexus LC, Lexus LS. Offset, width and rim diameter still need checking for each vehicle.

Other Toyota models

BZ4X 5x114.3 Yaris Cross 5x114.3 Aygo X 4x100 Corolla Cross 5x114.3 Yaris IV 5x100 Supra MK5 5x112 RAV4 V 5x114.3 Corolla E210 5x114.3 C-HR 5x114.3 Corolla EU 5x114.3 Mirai 5x114.3 Corolla US 5x100 All Toyota →

Does a value look wrong, or is a version missing? Let us know, we check every report.