FRENES

Toyota GR86 PCD

from 2021
VERIFIED
⌀56.1
PCD5x100
Centre bore56.1 mm
Offset (ET)ET48
Fixing typeM12x1.25
Original tyres215/45R17, 215/40R18
ZN8, 2.4
Performance parts for your Toyota GR86 Brakes, suspension, intake, exhaust… at STR Performance, French tuning shop. See the parts → (partner link)
Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota GR86

A Toyota GR86 (from 2021) uses a 5x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
  • Offset: the original is ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/45R17, 215/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 56.1 mm 7.5Jx17 ET48 215/45R17
Version 2 5x100 56.1 mm 7.5Jx18 ET48 215/40R18

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota GR86 without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota GT 86 from 2012 MG ZS II 2020–2024 Subaru Impreza GT 2017–2023 Subaru BRZ from 2012 Subaru XV 2011–2017 Saab 9-2X 2004–2006 Subaru Baja 2002–2007 MG ZT 2001–2005 Subaru Impreza WRX STi 2000–2005 Rover 75 1999–2006 Subaru Outback 1998–2003 Subaru Forester 1997–2002 Subaru Impreza 1993–2000 Subaru Legacy 1989–2003

Will wheels from another vehicle fit your GR86?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota GR86?

A Toyota GR86 (from 2021) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Toyota GR86 need a hub centric ring?

The centre bore (hub diameter) of a Toyota GR86 is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota GR86?

The recorded original offset is ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Toyota GR86?

With the same PCD (5x100) and the same centre bore (56.1 mm), these include: Toyota GT 86, MG ZS II, Subaru Impreza GT, Subaru BRZ. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.