FRENES

Toyota C-HR II PCD

from 2023
VERIFIED
⌀60.1
PCD5x114.3
Centre bore60.1 mm
Offset (ET)ET30 to ET35
Fixing typeM12x1.5
Original tyres215/60R17, 225/55R18, 225/50R19
Écrous
Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota C-HR II

A Toyota C-HR II (from 2023) uses a 5x114.3 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET30 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R17, 225/55R18, 225/50R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Toyota C-HR

Previous generation: Toyota C-HR (from 2016) — same 5x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

C-HR from 2016 · 5x114.3 C-HR II from 2023

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 60.1 mm 6.5Jx17 ET30 215/60R17
Version 2 5x114.3 60.1 mm 7Jx18 ET35 225/55R18
Version 3 5x114.3 60.1 mm 7Jx19 ET35 225/50R19

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota C-HR II without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Prius V from 2023 Toyota BZ4X from 2022 Toyota Yaris Cross from 2021 Toyota Corolla Cross from 2020 Toyota GR Yaris from 2020 Toyota Corolla E210 from 2019 Toyota RAV4 V from 2019 Toyota C-HR from 2016 Toyota Corolla EU 2016–2019 Toyota Mirai 2014–2021 Toyota Auris II 2012–2018 Toyota Prius Wagon from 2012 Toyota RAV4 IV 2012–2018 Toyota Sienna 2011–2020 Toyota Verso from 2009 Toyota Avensis III from 2008

Will wheels from another vehicle fit your C-HR II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota C-HR II?

A Toyota C-HR II (from 2023) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Toyota C-HR II need a hub centric ring?

The centre bore (hub diameter) of a Toyota C-HR II is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota C-HR II?

The recorded original offset is ET30 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Toyota C-HR II?

With the same PCD (5x114.3) and the same centre bore (60.1 mm), these include: Toyota Prius V, Toyota BZ4X, Toyota Yaris Cross, Toyota Corolla Cross. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.