Toyota Land Cruiser J20 V8 PCD

from 2008

VERIFIED

Centre bore110 mm

Offset (ET)ET60

Fixing typeEcrous - 14x1.50

Tightening torque130 Nm

Original tyres285/60R18

Hub centric rings 110 mm → Wheel spacers 5x150(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Land Cruiser J20 V8

A Toyota Land Cruiser J20 V8 (from 2008) uses a 5x150 PCD and a centre bore of 110 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x150 required. See all vehicles with 5x150.
Centre bore: the wheel must have a centre bore of 110 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 110 mm.
Offset: the original is ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 285/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x150 PCD and same 110 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Land Cruiser J20 V8 without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Sequoia 2001–2007 Toyota Tundra 1999–2007 Toyota Land Cruiser J100 1998–2007 Lexus LX570 from 2008 Lexus LX470 1998–2007

Will wheels from another vehicle fit your Land Cruiser J20 V8?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Toyota Land Cruiser J20 V8?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Toyota Sequoia 2001–2007

Frequently asked questions

What is the PCD of a Toyota Land Cruiser J20 V8?

A Toyota Land Cruiser J20 V8 (from 2008) has a PCD of 5x150: 5 studs or bolts spaced around a circle 150 mm in diameter.

Does a Toyota Land Cruiser J20 V8 need a hub centric ring?

The centre bore (hub diameter) of a Toyota Land Cruiser J20 V8 is 110 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Land Cruiser J20 V8?

The recorded original offset is ET60. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Land Cruiser J20 V8?

The specified tightening torque is 130 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Land Cruiser J20 V8?

With the same PCD (5x150) and the same centre bore (110 mm), these include: Toyota Sequoia, Toyota Tundra, Toyota Land Cruiser J100, Lexus LX570. Offset, width and rim diameter still need checking for each vehicle.

Other Toyota models

BZ4X 5x114.3 Yaris Cross 5x114.3 Aygo X 4x100 Yaris IV 5x100 Corolla Cross 5x114.3 RAV4 V 5x114.3 Corolla E210 5x114.3 Supra MK5 5x112 Century 5x120 Corolla EU 5x114.3 C-HR 5x114.3 Mirai 5x114.3 All Toyota →

Does a value look wrong, or is a version missing? Let us know, we check every report.