FRENES

Toyota Tundra PCD

1999–2007
VERIFIED
⌀106
PCD6x139.7 or 5x150
Centre bore106 or 110 mm
Offset (ET)ET8 to ET60
Fixing typeEcrous - 12x1.50
Tightening torque120 Nm
⚠ This model comes with 6x139.7 or 5x150 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 106 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Tundra

A Toyota Tundra (1999–2007) uses a 6x139.7 or 5x150 PCD and a centre bore of 106 or 110 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x139.7 or 5x150 required. See all vehicles with 6x139.7.
  • Centre bore: the wheel must have a centre bore of 106 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 106 mm.
  • Offset: the original is ET8 to ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 106 mm — ET8 —
Version 2 5x150 110 mm — ET60 —

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 106 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Tundra without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota FJ Cruiser from 2006 Toyota 4 Runner from 2003 Toyota Land Cruiser Prado 2002–2009 Toyota Sequoia 2001–2007 Toyota Land Cruiser J90 1996–2002 Toyota Tacoma 1995–2004 Toyota Hi-Ace 2WD 1989–1995 Toyota HiLux 4WD 1989–1999 Lexus GX460 from 2009 Lexus GX470 2002–2009

Will wheels from another vehicle fit your Tundra?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota Tundra?

A Toyota Tundra (1999–2007) can have a 6x139.7 or 5x150 PCD depending on the version: check on an original wheel.

Does a Toyota Tundra need a hub centric ring?

The centre bore (hub diameter) of a Toyota Tundra is 106 or 110 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Tundra?

The recorded original offset is ET8 to ET60 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Tundra?

The specified tightening torque is 120 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Tundra?

With the same PCD (6x139.7) and the same centre bore (106 mm), these include: Toyota FJ Cruiser, Toyota 4 Runner, Toyota Land Cruiser Prado, Toyota Sequoia. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.