Volvo V40 II PCD

2012–2019
VERIFIED
⌀63.4
Centre bore63.4 mm
Offset (ET)ET46 to ET52.5
Fixing typeM12x1.5
Tightening torque110 Nm
Original tyres195/65R15, 205/55R16, 205/50R17, 225/45R17
Hors Cross Country (déjà dans la base) ; restylage 2016 ; déport 50 ou 52,5 selon la jante
Performance parts for your Volvo V40 II Brakes, suspension, intake, exhaust… at STR Performance, French tuning shop. See the parts → (partner link)

Fitting wheels on a Volvo V40 II

A Volvo V40 II (2012–2019) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET46 to ET52.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/55R16, 205/50R17, 225/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Volvo V40

Previous generation: Volvo V40 (1996–2005) — the bolt pattern changes (5x108 instead of 4x114.3): the wheels are not interchangeable.

V40 1996–2005 · 4x114.3 V40 II 2012–2019

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 6Jx15 ET46 195/65R15
Version 2 5x108 63.4 mm 6.5Jx16 ET50 205/55R16
Version 3 5x108 63.4 mm 7Jx17 ET50 205/50R17
Version 4 5x108 63.4 mm 7.5Jx17 ET50 225/45R17
Version 5 5x108 63.4 mm 7.5Jx18 ET52.5 225/40R18

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo V40 II without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your V40 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo V40 II?

A Volvo V40 II (2012–2019) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo V40 II need a hub centric ring?

The centre bore (hub diameter) of a Volvo V40 II is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo V40 II?

The recorded original offset is ET46 to ET52.5 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo V40 II?

The specified tightening torque is 110 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo V40 II?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Volvo EC40, Volvo EX40 axe arrière, Volvo EX40 axe avant, Volvo EX30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.