FRENES

Chevrolet El Camino PCD

1959–1987
VERIFIED
⌀70.3
PCD5x120.65
Centre bore70.3 mm
Fixing type-
Tightening torque110 Nm
Hub centric rings 70.3 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet El Camino

A Chevrolet El Camino (1959–1987) uses a 5x120.65 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120.65 required. See all vehicles with 5x120.65.
  • Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
  • Fixings: thread -, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet El Camino without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Corvette C7 2013–2019 Chevrolet Corvette C6 2004–2013 Chevrolet Jimny from 1998 Chevrolet Corvette C5 1997–2004 Chevrolet Blazer 2WD 1986–2004 Chevrolet Blazer 4WD 1986–2004 Chevrolet Corvette C4 1984–1996 Chevrolet S10 1982–1993 Chevrolet Caprice 1971–1977 Chevrolet Camaro 1969–1982 Chevrolet Monte Carlo 1969–1981 Chevrolet Corvette C3 1968–1982 Chevrolet Chevelle 1964–1977 Chevrolet Malibu 1964–1983 Chevrolet Nova 1964–1981 Chevrolet Impala 1957–1971

Will wheels from another vehicle fit your El Camino?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chevrolet El Camino?

A Chevrolet El Camino (1959–1987) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Chevrolet El Camino need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet El Camino is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What tightening torque for the wheels of a Chevrolet El Camino?

The specified tightening torque is 110 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet El Camino?

With the same PCD (5x120.65) and the same centre bore (70.3 mm), these include: Chevrolet Corvette C7, Chevrolet Corvette C6, Chevrolet Jimny, Chevrolet Corvette C5. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.