FRENES

Ferrari 456 GT PCD

1993–2004
VERIFIED
⌀67.1
PCD5x108
Centre bore67.1 mm
Offset (ET)ET25 to ET50
Fixing typeM14x1.5
Original tyres255/45R17, 285/40R17
456 GT (1993-1997) et 456M (1998-2004), mêmes cotes.
Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ferrari 456 GT

A Ferrari 456 GT (1993–2004) uses a 5x108 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET25 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/45R17, 285/40R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Avant 5x108 67.1 mm 8.5Jx17 ET50 255/45R17
Arrière 5x108 67.1 mm 10Jx17 ET25 285/40R17

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ferrari 456 GT without rings. Offset, width, diameter and caliper clearance still need checking.

Ferrari 575 2005–2006 Ferrari F430 Coupe 2004–2009 Ferrari F430 Spider 2004–2009 Ferrari 360 Modena 1999–2004 Ferrari 360 Spider 1999–2004 Ferrari 550 Maranello 1996–2002 Ferrari F355 1994–2000 Ferrari F512 1991–1995 Ferrari 348 1989–1995 Maserati Gransport from 2006 Volvo XC90 2002–2014 Maserati Coupe 2001–2007 Maserati 3200 GT 1998–2002

Will wheels from another vehicle fit your 456 GT?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ferrari 456 GT?

A Ferrari 456 GT (1993–2004) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Ferrari 456 GT need a hub centric ring?

The centre bore (hub diameter) of a Ferrari 456 GT is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ferrari 456 GT?

The recorded original offset is ET25 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Ferrari 456 GT?

With the same PCD (5x108) and the same centre bore (67.1 mm), these include: Ferrari 575, Ferrari F430 Coupe, Ferrari F430 Spider, Ferrari 360 Modena. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.