Ford Ranger PCD

1999–2006
VERIFIED
⌀93.1
Centre bore93.1 mm
Offset (ET)ET30 to ET55
Fixing typeEcrous - 12x1.50
Tightening torque103 Nm
Original tyres235/75R15, 215/70R16, 255/70R16

Fitting wheels on a Ford Ranger

A Ford Ranger (1999–2006) uses a 6x139.7 PCD and a centre bore of 93.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x139.7 required. See all vehicles with 6x139.7.
  • Centre bore: the wheel must have a centre bore of 93.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 93.1 mm.
  • Offset: the original is ET30 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/75R15, 215/70R16, 255/70R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 93.1 mm — ET30 —
Version 2 6x139.7 93.1 mm — ET30 235/75R15
Version 3 6x139.7 93.1 mm — ET55 215/70R16
Version 4 6x139.7 93.1 mm — ET55 255/70R16

Will wheels from another vehicle fit your Ranger?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Ranger?

A Ford Ranger (1999–2006) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Ford Ranger need a hub centric ring?

The centre bore (hub diameter) of a Ford Ranger is 93.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Ranger?

The recorded original offset is ET30 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Ranger?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Ranger?

With the same PCD (6x139.7) and the same centre bore (93.1 mm), these include: Ford Bronco, Mazda BT50, Mazda B2500, Mazda B2600. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.