Toyota HiLux VIII PCD

from 2015

VERIFIED

PCD6x139.7

Centre bore106.1 mm

Offset (ET)ET30 to ET50

Fixing typeM12x1.5

Tightening torque105 Nm

Original tyres225/70R17, 265/65R17, 265/60R18

AN120/AN130, 2.4 et 2.8 D-4D

Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota HiLux VIII

A Toyota HiLux VIII (from 2015) uses a 6x139.7 PCD and a centre bore of 106.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 106.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 106.1 mm.
Offset: the original is ET30 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.5, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/70R17, 265/65R17, 265/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Toyota HiLux

Previous generation: Toyota HiLux 4WD (1989–1999) — same 6x139.7 bolt pattern, but the centre bore goes from 106 to 106.1 mm: hub ring one way, no fit the other way.

HiLux 2WD 1986–2005 · 5x114.3 HiLux 4WD 1989–1999 · 6x139.7 HiLux VIII from 2015

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	6x139.7	106.1 mm	6Jx17	ET50	225/70R17
Version 2	6x139.7	106.1 mm	7.5Jx17	ET30	265/65R17
Version 3	6x139.7	106.1 mm	7.5Jx18	ET30	265/60R18

Will wheels from another vehicle fit your HiLux VIII?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 106.1 mm, and will not fit if it is smaller.

Toyota Land Cruiser 250 ⌀95.1 Toyota FJ Cruiser ⌀106 Toyota 4 Runner ⌀106 Toyota Land Cruiser Prado ⌀106 Toyota Sequoia ⌀106 Toyota Tundra ⌀106 Toyota Land Cruiser J90 ⌀106 Toyota Tacoma ⌀106

Frequently asked questions

What is the PCD of a Toyota HiLux VIII?

A Toyota HiLux VIII (from 2015) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Toyota HiLux VIII need a hub centric ring?

The centre bore (hub diameter) of a Toyota HiLux VIII is 106.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota HiLux VIII?

The recorded original offset is ET30 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota HiLux VIII?

The specified tightening torque is 105 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Toyota models

Land Cruiser 250 6x139.7 C-HR II 5x114.3 Prius V 5x114.3 BZ4X 5x114.3 GR86 5x100 Aygo X 4x100 Yaris Cross 5x114.3 Yaris IV 5x100 ProAce City 5x108 Corolla Cross 5x114.3 GR Yaris 5x114.3 Corolla E210 5x114.3 All Toyota →

Does a value look wrong, or is a version missing? Let us know, we check every report.