FRENES

Ford Ranger T6 PCD

2011–2022
VERIFIED
⌀93.1
PCD6x139.7
Centre bore93.1 mm
Offset (ET)ET55
Fixing typeM12x1.5
Tightening torque135 Nm
Original tyres255/70R16, 265/65R17, 265/60R18
Écrous
Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Ranger T6

A Ford Ranger T6 (2011–2022) uses a 6x139.7 PCD and a centre bore of 93.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x139.7 required. See all vehicles with 6x139.7.
  • Centre bore: the wheel must have a centre bore of 93.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 93.1 mm.
  • Offset: the original is ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/70R16, 265/65R17, 265/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Ford Ranger

Previous generation: Ford Ranger (1999–2006) — same 6x139.7 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Ford Ranger P703 (from 2022) — same 6x139.7 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Ranger 5 trou 1983–2001 · 5x114.3 Ranger 1999–2006 · 6x139.7 Ranger T6 2011–2022 Ranger P703 from 2022 · 6x139.7

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 93.1 mm 7Jx16 ET55 255/70R16
Version 2 6x139.7 93.1 mm 8Jx17 ET55 265/65R17
Version 3 6x139.7 93.1 mm 8Jx18 ET55 265/60R18

Will wheels from another vehicle fit your Ranger T6?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ford Ranger T6?

A Ford Ranger T6 (2011–2022) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Ford Ranger T6 need a hub centric ring?

The centre bore (hub diameter) of a Ford Ranger T6 is 93.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Ranger T6?

The recorded original offset is ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Ranger T6?

The specified tightening torque is 135 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Ranger T6?

With the same PCD (6x139.7) and the same centre bore (93.1 mm), these include: Ford Ranger P703, Ford Ranger, Ford Bronco, Volkswagen Amarok II. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.