Mazda E2000,2200 PCD

1983–1999

VERIFIED

Centre bore93.1 mm

Offset (ET)ET40 to ET50

Fixing typeEcrous - 12x1.50

Hub centric rings 93.1 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda E2000,2200

A Mazda E2000,2200 (1983–1999) uses a 6x139.7 PCD and a centre bore of 93.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 93.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 93.1 mm.
Offset: the original is ET40 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	6x139.7	93.1 mm	—	ET40	—
Version 2	6x139.7	93.1 mm	—	ET50	—

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 93.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda E2000,2200 without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda BT50 2007–2014 Mazda B2500 1999–2006 Mazda B2600 1999–2006 Ford Ranger 1999–2006 Ford Bronco 1975–1996

Will wheels from another vehicle fit your E2000,2200?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 93.1 mm, and will not fit if it is smaller.

Infiniti QX80 ⌀77.8 Hyundai Staria ⌀92.5 RAM RAM 1500 ⌀77.8 GMC Sierra 1500 ⌀78.1 Holden Colorado ⌀99.5 Lexus GX460 ⌀106 Hyundai H-1 H300 ⌀92.3 Toyota FJ Cruiser ⌀106

Frequently asked questions

What is the PCD of a Mazda E2000,2200?

A Mazda E2000,2200 (1983–1999) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Mazda E2000,2200 need a hub centric ring?

The centre bore (hub diameter) of a Mazda E2000,2200 is 93.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda E2000,2200?

The recorded original offset is ET40 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mazda E2000,2200?

With the same PCD (6x139.7) and the same centre bore (93.1 mm), these include: Mazda BT50, Mazda B2500, Mazda B2600, Ford Ranger. Offset, width and rim diameter still need checking for each vehicle.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.