Lexus GX460 PCD

from 2009

VERIFIED

Centre bore106 mm

Offset (ET)ET30

Fixing typeEcrous - 12x1.50

Tightening torque103 Nm

Hub centric rings 106 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lexus GX460

A Lexus GX460 (from 2009) uses a 6x139.7 PCD and a centre bore of 106 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 106 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 106 mm.
Offset: the original is ET30. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 106 mm centre bore: wheels from these vehicles bolt on and centre on a Lexus GX460 without rings. Offset, width, diameter and caliper clearance still need checking.

Lexus GX470 2002–2009 Toyota FJ Cruiser from 2006 Toyota 4 Runner from 2003 Toyota Land Cruiser Prado 2002–2009 Toyota Sequoia 2001–2007 Toyota Tundra 1999–2007 Toyota Land Cruiser J90 1996–2002 Toyota Tacoma 1995–2004 Toyota Hi-Ace 2WD 1989–1995 Toyota HiLux 4WD 1989–1999

Will wheels from another vehicle fit your GX460?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 106 mm, and will not fit if it is smaller.

Infiniti QX80 ⌀77.8 Hyundai Staria ⌀92.5 RAM RAM 1500 ⌀77.8 GMC Sierra 1500 ⌀78.1 Holden Colorado ⌀99.5 Hyundai H-1 H300 ⌀92.3 Mazda BT50 ⌀93.1 Chevrolet Colorado ⌀99.5

Frequently asked questions

What is the PCD of a Lexus GX460?

A Lexus GX460 (from 2009) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Lexus GX460 need a hub centric ring?

The centre bore (hub diameter) of a Lexus GX460 is 106 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lexus GX460?

The recorded original offset is ET30. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Lexus GX460?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Lexus GX460?

With the same PCD (6x139.7) and the same centre bore (106 mm), these include: Lexus GX470, Toyota FJ Cruiser, Toyota 4 Runner, Toyota Land Cruiser Prado. Offset, width and rim diameter still need checking for each vehicle.

Other Lexus models

TX 5x120 RZ 5x114.3 LBX 5x114.3 ES 5x114.3 UX 5x114.3 LC 5x120 LS 5x120 RX 5x114.3 RX200t 5x114.3 RC 5x114.3 NX 5x114.3 GS300h 5x114.3 All Lexus →

Does a value look wrong, or is a version missing? Let us know, we check every report.