FRENES

Hyundai i10 II PCD

2013–2019
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET35 to ET53
Fixing typeM12x1.5
Original tyres155/70R13, 175/65R14, 185/55R15
IA, restylage 2016
Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai i10 II

A Hyundai i10 II (2013–2019) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET35 to ET53. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/70R13, 175/65R14, 185/55R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Hyundai i10

Previous generation: Hyundai i10 I (2008–2013) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Hyundai i10 III (from 2019) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

i10 I 2008–2013 · 4x100 i10 II 2013–2019 i10 III from 2019 · 4x100

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm 4.5Jx13 ET35 155/70R13
Version 2 4x100 54.1 mm 5.5Jx14 ET47 175/65R14
Version 3 4x100 54.1 mm 6Jx15 ET53 185/55R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai i10 II without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Inster from 2024 Hyundai Bayon from 2021 Hyundai i20 III from 2020 Hyundai i10 III from 2019 Hyundai i20 II 2014–2020 Hyundai i10 I 2008–2013 Hyundai i20 I 2008–2015 Hyundai Getz Cross 2007–2008 Hyundai Getz 2002–2011 Hyundai Atos 1997–2000 Hyundai Accent 1994–1999 Hyundai Excel 1994–1999 Suzuki Swift VI from 2024 Toyota Aygo X 2021–2025 Kia Picanto III from 2017 Kia Rio IV 2017–2023

Will wheels from another vehicle fit your i10 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai i10 II?

A Hyundai i10 II (2013–2019) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Hyundai i10 II need a hub centric ring?

The centre bore (hub diameter) of a Hyundai i10 II is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai i10 II?

The recorded original offset is ET35 to ET53 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai i10 II?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Hyundai Inster, Hyundai Bayon, Hyundai i20 III, Hyundai i10 III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.