FRENES

Hyundai i20 I PCD

2008–2015
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET46 to ET47
Fixing typeEcrous - 12x1.50
Tightening torque100 Nm
Original tyres175/70R14, 185/65R15
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai i20 I

A Hyundai i20 I (2008–2015) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET46 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14, 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm — ET46 175/70R14
Version 2 4x100 54.1 mm — ET47 185/65R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai i20 I without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Inster from 2024 Hyundai Bayon from 2021 Hyundai i20 III from 2020 Hyundai i10 III from 2019 Hyundai i10 I 2008–2013 Hyundai Getz Cross 2007–2008 Hyundai Getz 2002–2011 Hyundai Atos 1997–2000 Hyundai Accent 1994–1999 Hyundai Excel 1994–1999 Toyota Aygo X 2021–2025 Kia Picanto III from 2017 Kia Stonic from 2017 Fiat 124 Spider from 2015 Mazda Mazda2 from 2015 Suzuki Alivio 2015–2021

Will wheels from another vehicle fit your i20 I?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai i20 I?

A Hyundai i20 I (2008–2015) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Hyundai i20 I need a hub centric ring?

The centre bore (hub diameter) of a Hyundai i20 I is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai i20 I?

The recorded original offset is ET46 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Hyundai i20 I?

The specified tightening torque is 100 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Hyundai i20 I?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Hyundai Inster, Hyundai Bayon, Hyundai i20 III, Hyundai i10 III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.