FRENES

Hyundai Accent PCD

1994–1999
VERIFIED
⌀54.1
PCD4x100 or 4x114.3
Centre bore67.1 or 54.1 mm
Offset (ET)ET43 to ET46
Fixing typeEcrous - 12x1.50
Tightening torque100 Nm
Original tyres175/70R13, 175/70R14, 185/65R15
⚠ This model comes with 4x100 or 4x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Accent

A Hyundai Accent (1994–1999) uses a 4x100 or 4x114.3 PCD and a centre bore of 67.1 or 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 4x114.3 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET43 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R13, 175/70R14, 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 67.1 mm — ET46 175/70R13
Version 2 4x100 54.1 mm — ET46 175/70R13
Version 3 4x100 54.1 mm — ET46 175/70R14
Version 4 4x100 54.1 mm — ET43 175/70R14
Version 5 4x100 54.1 mm — ET45 185/65R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Accent without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai Inster from 2024 Hyundai Bayon from 2021 Hyundai i20 III from 2020 Hyundai i10 III from 2019 Hyundai i10 I 2008–2013 Hyundai i20 I 2008–2015 Hyundai Getz Cross 2007–2008 Hyundai Getz 2002–2011 Hyundai Atos 1997–2000 Hyundai Excel 1994–1999 Toyota Aygo X 2021–2025 Kia Picanto III from 2017 Kia Stonic from 2017 Fiat 124 Spider from 2015 Mazda Mazda2 from 2015 Suzuki Alivio 2015–2021

Will wheels from another vehicle fit your Accent?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai Accent?

A Hyundai Accent (1994–1999) can have a 4x100 or 4x114.3 PCD depending on the version: check on an original wheel.

Does a Hyundai Accent need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Accent is 67.1 or 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Accent?

The recorded original offset is ET43 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Hyundai Accent?

The specified tightening torque is 100 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Hyundai Accent?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Hyundai Inster, Hyundai Bayon, Hyundai i20 III, Hyundai i10 III. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.