FRENES

Hyundai i30 I PCD

2007–2012
VERIFIED
⌀67.1
PCD5x114.3
Centre bore67.1 mm
Offset (ET)ET46 to ET47
Fixing typeEcrous - 12x1.50
Tightening torque100 Nm
Original tyres185/65R15, 195/65R15
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai i30 I

A Hyundai i30 I (2007–2012) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET46 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R15, 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 67.1 mm 5.5Jx15 ET47 185/65R15
Version 2 5x114.3 67.1 mm 5.5Jx15 ET46 195/65R15

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai i30 I without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai i30 III from 2017 Hyundai Kona 2017–2022 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i40 from 2011 Hyundai Veloster 2011–2017 Hyundai ix20 from 2010 Hyundai ix35 from 2010 Hyundai ix55 from 2009 Hyundai Genesis from 2008

Will wheels from another vehicle fit your i30 I?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Hyundai i30 I?

A Hyundai i30 I (2007–2012) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai i30 I need a hub centric ring?

The centre bore (hub diameter) of a Hyundai i30 I is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai i30 I?

The recorded original offset is ET46 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Hyundai i30 I?

The specified tightening torque is 100 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Hyundai i30 I?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai IONIQ 6, Hyundai Stargazer, Hyundai IONIQ 5, Hyundai IONIQ 5 N. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.