A Jeep Grand Cherokee SRT (2012–2023) uses a 5x127 PCD and a centre bore of 71.5 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 71.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.5 mm.
Offset: the original is ET56. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 136 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 265/50R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x127 PCD and same 71.5 mm centre bore: wheels from these vehicles bolt on and centre on a Jeep Grand Cherokee SRT without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Grand Cherokee SRT?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 5x127 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.5 mm, and will not fit if it is smaller.
A Jeep Grand Cherokee SRT (2012–2023) has a PCD of 5x127: 5 studs or bolts spaced around a circle 127 mm in diameter.
Does a Jeep Grand Cherokee SRT need a hub centric ring?
The centre bore (hub diameter) of a Jeep Grand Cherokee SRT is 71.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Jeep Grand Cherokee SRT?
The recorded original offset is ET56. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Jeep Grand Cherokee SRT?
The specified tightening torque is 136 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Jeep Grand Cherokee SRT?
With the same PCD (5x127) and the same centre bore (71.5 mm), these include: Jeep Gladiator, Jeep Wrangler, Fiat Freemont, Lancia Voyager. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more