Lancia Beta PCD

1973–1985

VERIFIED

Centre bore58.1 mm

Offset (ET)ET34

Fixing typeM12x1.25

Original tyres175/70R14

Hub centric rings 58.1 mm → Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lancia Beta

A Lancia Beta (1973–1985) uses a 4x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x98 required. See all vehicles with 4x98.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET34. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/70R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Lancia Beta without rings. Offset, width, diameter and caliper clearance still need checking.

Lancia Musa 2004–2012 Lancia Ypsilon 2003–2011 Lancia Lybra 1999–2006 Lancia Y 1995–2003 Lancia Delta 1993–1999 Lancia Delta Integrale 4 trou 1993–1999 Lancia Dedra 1989–2000 Lancia Thema 1989–1995 Abarth 500e from 2023 Abarth 595 2016–2022 RAM RAM 700 Pickup from 2014 Fiat 500e 2013–2019 Fiat Panda III from 2012 Fiat Qubo from 2010 Alfa Romeo Mito 2008–2019 Alfa Romeo Mito 1.4 Sport 2008–2019

Will wheels from another vehicle fit your Beta?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Lancia Beta?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Lancia Musa 2004–2012 Wheels from Lancia Ypsilon 2003–2011 Wheels from Lancia Y 1995–2003 Wheels from RAM RAM 700 Pickup from 2014

Same PCD, different centre bore

These vehicles also use 4x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Lada 112 ⌀58.5 Lada 110 ⌀58.5 Alfa Romeo 75 4 trou ⌀58.6 Fiat 500 (1957) ⌀150

Frequently asked questions

What is the PCD of a Lancia Beta?

A Lancia Beta (1973–1985) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a Lancia Beta need a hub centric ring?

The centre bore (hub diameter) of a Lancia Beta is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lancia Beta?

The recorded original offset is ET34. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lancia Beta?

With the same PCD (4x98) and the same centre bore (58.1 mm), these include: Lancia Musa, Lancia Ypsilon, Lancia Lybra, Lancia Y. Offset, width and rim diameter still need checking for each vehicle.

Other Lancia models

Flavia 5x114.3 Voyager 5x127 Musa 4x98 Ypsilon 4x98 Phedra 5x98 Thesis 5x108 Lybra 4x98 Y 4x98 Zeta 5x98 Delta Integrale 5 trou 5x98 Kappa 5x108 Delta 4x98 All Lancia →

Does a value look wrong, or is a version missing? Let us know, we check every report.