Mazda MX-6 PCD

1992–1997

VERIFIED

Centre bore67.1 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Tightening torque103 Nm

Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda MX-6

A Mazda MX-6 (1992–1997) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda MX-6 without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda CX-80 from 2024 Mazda Mazda6e from 2024 Mazda CX-60 from 2022 Mazda MX-30 from 2020 Mazda CX-30 from 2019 Mazda CX-3 2015–2024 Mazda Mazda3 2013–2019 Mazda CX-5 2012–2017 Mazda Mazda3 MPS 2009–2013 Mazda CX-7 2007–2012 Mazda CX-9 from 2007 Mazda 3 MPS 2006–2009 Mazda 6 MPS 2006–2008 Mazda 5 2005–2010 Mazda 3 2003–2009 Mazda RX-8 2003–2012

Will wheels from another vehicle fit your MX-6?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.

Mazda RX-7 ⌀59.6 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Leapmotor C10 ⌀73.1 Renault 5 E-Tech ⌀66.1 Renault Grand Kangoo ⌀66.1 Renault Rafale ⌀66.1

Frequently asked questions

What is the PCD of a Mazda MX-6?

A Mazda MX-6 (1992–1997) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mazda MX-6 need a hub centric ring?

The centre bore (hub diameter) of a Mazda MX-6 is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda MX-6?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda MX-6?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mazda MX-6?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Mazda CX-80, Mazda Mazda6e, Mazda CX-60, Mazda MX-30. Offset, width and rim diameter still need checking for each vehicle.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.