FRENES

Cadillac Escalade PCD

1999–2006
VERIFIED
⌀78.1
PCD6x139.7
Centre bore78.1 mm
Offset (ET)ET25 to ET33
Fixing type-
Tightening torque140 Nm
Original tyres275/55R20, 265/65R18
Hub centric rings 78.1 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Cadillac Escalade

A Cadillac Escalade (1999–2006) uses a 6x139.7 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x139.7 required. See all vehicles with 6x139.7.
  • Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
  • Offset: the original is ET25 to ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread -, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 275/55R20, 265/65R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 78.1 mm — ET25 —
Version 2 6x139.7 78.1 mm — ET33 —
Version 3 6x139.7 78.1 mm — ET27 275/55R20
Version 4 6x139.7 78.1 mm — ET28 265/65R18

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Cadillac Escalade without rings. Offset, width, diameter and caliper clearance still need checking.

GMC Sierra 1500 from 2010 Infiniti QX56 2004–2013 Nissan Armada from 2004 Chevrolet Astro 4WD from 2003 Nissan Titan from 2003 Chevrolet Avalanche 2001–2006 Chevrolet Silverado 1999–2005 Chevrolet Tahoe 1996–2005 Chevrolet C,K 1988–2010 Nissan Patrol 1987–1997 GMC Safari 1985–2002

Will wheels from another vehicle fit your Escalade?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Cadillac Escalade?

A Cadillac Escalade (1999–2006) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Cadillac Escalade need a hub centric ring?

The centre bore (hub diameter) of a Cadillac Escalade is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Cadillac Escalade?

The recorded original offset is ET25 to ET33 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Cadillac Escalade?

The specified tightening torque is 140 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Cadillac Escalade?

With the same PCD (6x139.7) and the same centre bore (78.1 mm), these include: GMC Sierra 1500, Infiniti QX56, Nissan Armada, Chevrolet Astro 4WD. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.