Opel Rekord D PCD

1972–1977

VERIFIED

Centre bore57.1 mm

Offset (ET)ET37

Fixing typeEcrous - 12x1.50

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Rekord D

A Opel Rekord D (1972–1977) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET37. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Rekord D without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Rekord E 1977–1986 Opel Ascona B 1975–1981 Opel Manta B 1975–1988 Opel Kadett C 1973–1979 Opel Ascona A 1970–1975 Opel Manta A 1970–1975 Opel Kadett B 1965–1973 Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Seat Mii 2012–2021 Skoda Citigo 2012–2020 Volkswagen Up 2011–2023 Chery Amulet from 2006 Volkswagen Lupo GTI 2002–2005 Audi A2 1.2 TDI 2000–2006

Will wheels from another vehicle fit your Rekord D?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Opel Karl ⌀56.6 Opel Adam Rocks ⌀56.6 Opel Corsa E ⌀56.6 Opel Adam ⌀56.6 Opel Corsa D 4 trou ⌀56.6 Opel Astra H 4 trou ⌀56.6 Opel Tigra Twin Top ⌀56.6 Opel Meriva 4 trou ⌀56.6

Frequently asked questions

What is the PCD of a Opel Rekord D?

A Opel Rekord D (1972–1977) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Opel Rekord D need a hub centric ring?

The centre bore (hub diameter) of a Opel Rekord D is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Rekord D?

The recorded original offset is ET37. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Opel Rekord D?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Opel Rekord E, Opel Ascona B, Opel Manta B, Opel Kadett C. Offset, width and rim diameter still need checking for each vehicle.

Other Opel models

Rocks-E 4x108 Zafira Life 5x108 Corsa F 4x108 Ampera-e 5x105 Crossland X 4x108 Grandland X 5x108 Adam S 5x110 Karl 4x100 Astra K 5x105 Adam Rocks 4x100 Corsa E 4x100 Insignia Country Tourer 5x120 All Opel →

Does a value look wrong, or is a version missing? Let us know, we check every report.