Peugeot 806 PCD

1994–2002

VERIFIED

Centre bore58.1 mm

Offset (ET)ET31

Fixing typeM14x1.50

Tightening torque100 Nm

Original tyres205/65R15

Hub centric rings 58.1 mm → Wheel spacers 5x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 806

A Peugeot 806 (1994–2002) uses a 5x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x98 required. See all vehicles with 5x98.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET31. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot 806 without rings. Offset, width, diameter and caliper clearance still need checking.

Peugeot 807 from 2002 Peugeot Expert 1996–2006 Fiat e-Doblo from 2022 Alfa Romeo 4C 2013–2020 Fiat 500L Trekking from 2013 RAM Promaster City from 2013 Fiat 500L from 2012 Holden Combo from 2011 Fiat Doblo Maxi 2010–2022 Alfa Romeo GT 2003–2010 Lancia Phedra 2002–2010 Alfa Romeo 147 2001–2010 Fiat Doblo 2001–2005 Alfa Romeo 156 1997–2006 Citroen Jumpy 1996–2006 Alfa Romeo GTV 1995–2006

Will wheels from another vehicle fit your 806?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Peugeot 806?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Peugeot 807 from 2002 Wheels from Peugeot Expert 1996–2006 Wheels from Fiat 500L from 2012 Wheels from Holden Combo from 2011

Same PCD, different centre bore

These vehicles also use 5x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Citroen C8 ⌀65.1 Fiat Scudo ⌀65.1 Alfa Romeo 75 5 trou, V6 ⌀58.6

Frequently asked questions

What is the PCD of a Peugeot 806?

A Peugeot 806 (1994–2002) has a PCD of 5x98: 5 studs or bolts spaced around a circle 98 mm in diameter.

Does a Peugeot 806 need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 806 is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 806?

The recorded original offset is ET31. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Peugeot 806?

The specified tightening torque is 100 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Peugeot 806?

With the same PCD (5x98) and the same centre bore (58.1 mm), these include: Peugeot 807, Peugeot Expert, Fiat e-Doblo, Alfa Romeo 4C. Offset, width and rim diameter still need checking for each vehicle.

Other Peugeot models

e-208 4x108 408 5x108 208 II 4x108 2008 II 4x108 Rifter 5x108 5008 II 5x108 Traveller 5x108 3008 II 5x108 RCZ-R 5x108 308 SW 5x108 108 4x100 308 II 5x108 All Peugeot →

Does a value look wrong, or is a version missing? Let us know, we check every report.