Renault Master FWD PCD

from 2010

VERIFIED

Centre bore89.1 mm

Offset (ET)ET66

Fixing typeM14x1.50

Tightening torque172 Nm

Original tyres215/65R16

Hub centric rings 89.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Master FWD

A Renault Master FWD (from 2010) uses a 5x130 PCD and a centre bore of 89.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 89.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 89.1 mm.
Offset: the original is ET66. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 172 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 89.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Master FWD without rings. Offset, width, diameter and caliper clearance still need checking.

Renault Master 1980–1997 Nissan NV400 from 2011 Nissan Interstar 2002–2010 Opel Movano 2000–2010

Will wheels from another vehicle fit your Master FWD?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Renault Master FWD?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Nissan NV400 from 2011

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 89.1 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6

Frequently asked questions

What is the PCD of a Renault Master FWD?

A Renault Master FWD (from 2010) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Renault Master FWD need a hub centric ring?

The centre bore (hub diameter) of a Renault Master FWD is 89.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Master FWD?

The recorded original offset is ET66. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Master FWD?

The specified tightening torque is 172 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Renault Master FWD?

With the same PCD (5x130) and the same centre bore (89.1 mm), these include: Renault Master, Nissan NV400, Nissan Interstar, Opel Movano. Offset, width and rim diameter still need checking for each vehicle.

Other Renault models

Twingo E-Tech 4x100 4 E-Tech 5x114.3 Mobilize Duo 3x100 Grand Kangoo 5x114.3 5 E-Tech 5x114.3 Symbioz 5x114.3 Rafale 5x114.3 Scenic E-Tech 5x114.3 Austral 5x114.3 Megane E-Tech 5x114.3 Arkana 5x114.3 Clio 5 4x100 All Renault →

Does a value look wrong, or is a version missing? Let us know, we check every report.