Nissan Interstar PCD

2002–2010

VERIFIED

Centre bore89.1 mm

Offset (ET)ET66

Fixing typeM14x1.50

Tightening torque172 Nm

Original tyres215/65/R16

Hub centric rings 89.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Interstar

A Nissan Interstar (2002–2010) uses a 5x130 PCD and a centre bore of 89.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 89.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 89.1 mm.
Offset: the original is ET66. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 172 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/65/R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x130	89.1 mm	—	ET66	—
Version 2	5x130	89.1 mm	—	ET66	215/65/R16

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 89.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Interstar without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan NV400 from 2011 Renault Master FWD from 2010 Opel Movano 2000–2010 Renault Master 1980–1997

Will wheels from another vehicle fit your Interstar?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 89.1 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6

Frequently asked questions

What is the PCD of a Nissan Interstar?

A Nissan Interstar (2002–2010) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Nissan Interstar need a hub centric ring?

The centre bore (hub diameter) of a Nissan Interstar is 89.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Interstar?

The recorded original offset is ET66 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Interstar?

The specified tightening torque is 172 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Interstar?

With the same PCD (5x130) and the same centre bore (89.1 mm), these include: Nissan NV400, Renault Master FWD, Opel Movano, Renault Master. Offset, width and rim diameter still need checking for each vehicle.

Other Nissan models

Dayz 4x100 Qashqai J12 5x114.3 Townstar 5x114.3 Ariya 5x114.3 Juke II 5x114.3 NV250 5x108 Micra K14 4x100 NV300 5x114.3 Almera 4x100 Murano 5x114.3 e-NV200 5x114.3 Pulsar 5x114.3 All Nissan →

Does a value look wrong, or is a version missing? Let us know, we check every report.