FRENES

Skoda Fabia I PCD

2000–2007
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET40 to ET46
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres165/70R14, 185/60R15, 185/70R14
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Skoda Fabia I

A Skoda Fabia I (2000–2007) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET40 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 165/70R14, 185/60R15, 185/70R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm — ET42 165/70R14
Version 2 5x100 57.1 mm — ET46 185/60R15
Version 3 5x100 57.1 mm — ET40 185/70R14

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Fabia I without rings. Offset, width, diameter and caliper clearance still need checking.

Skoda Fabia IV from 2021 Skoda Kamiq GT from 2020 Skoda Kamiq from 2019 Skoda Scala from 2019 Skoda Fabia 14 inch 2014–2021 Skoda Fabia 15 inch 2014–2021 Skoda Rapid 2012–2020 Skoda Fabia Scout 2009–2014 Skoda Roomster Scout 2007–2015 Skoda Roomster 2006–2015 Skoda Fabia RS 2003–2007 Skoda Praktik 2003–2015 Skoda Octavia I 1997–2005 MG Astor from 2021 Volkswagen Taigo from 2021 Audi A1 Citycarver 2019–2022

Will wheels from another vehicle fit your Fabia I?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Skoda Fabia I?

A Skoda Fabia I (2000–2007) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Skoda Fabia I need a hub centric ring?

The centre bore (hub diameter) of a Skoda Fabia I is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Fabia I?

The recorded original offset is ET40 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Skoda Fabia I?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Skoda Fabia I?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Skoda Fabia IV, Skoda Kamiq GT, Skoda Kamiq, Skoda Scala. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.