FRENES

Toyota Prius IV PCD

2015–2022
VERIFIED
⌀54.1
PCD5x100
Centre bore54.1 mm
Offset (ET)ET40 to ET50
Fixing typeM12x1.5
Tightening torque103 Nm
Original tyres195/65R15, 215/50R17
XW50, 1.8 hybride
Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Prius IV

A Toyota Prius IV (2015–2022) uses a 5x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET40 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 215/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Toyota Prius

Previous generation: Toyota Prius (1997–2003) — the bolt pattern changes (5x100 instead of 4x100): the wheels are not interchangeable. Next generation: Toyota Prius V (from 2023) — the bolt pattern changes (5x114.3 instead of 5x100): the wheels are not interchangeable.

Prius 1997–2003 · 4x100 Prius IV 2015–2022 Prius V from 2023 · 5x114.3

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 54.1 mm 6.5Jx15 ET40 195/65R15
Version 2 5x100 54.1 mm 7Jx17 ET50 215/50R17

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Prius IV without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Yaris IV from 2020 Toyota Corolla US 2013–2019 Toyota Verso S from 2010 Toyota Urban Cruiser from 2009 Toyota Avensis II 2003–2008 Toyota Yaris I 1999–2005 Toyota Avensis 1998–2003 Toyota Prius 1997–2003 Toyota Carina 1992–1997 Toyota Carina 5 trou 1988–1992 Toyota Camry 1982–1986 Toyota Celica 1971–1977 Mazda Mazda2 Hybrid from 2022 Lexus CT200h from 2011 Subaru Trezia 2010–2016

Will wheels from another vehicle fit your Prius IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota Prius IV?

A Toyota Prius IV (2015–2022) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Toyota Prius IV need a hub centric ring?

The centre bore (hub diameter) of a Toyota Prius IV is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Prius IV?

The recorded original offset is ET40 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Prius IV?

The specified tightening torque is 103 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Prius IV?

With the same PCD (5x100) and the same centre bore (54.1 mm), these include: Toyota Yaris IV, Toyota Corolla US, Toyota Verso S, Toyota Urban Cruiser. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.