A Skoda Fabia II (2007–2014) uses a 5x100 PCD and a centre bore of 57.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET35 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 165/70R14, 185/60R14, 195/55R15, 205/45R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Skoda Fabia
Previous generation: Skoda Fabia I (2000–2007) — same 5x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Skoda Fabia 14 inch (2014–2021) — same 5x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x100
57.1 mm
5Jx14
ET35
165/70R14
Version 2
5x100
57.1 mm
6Jx14
ET37
185/60R14
Version 3
5x100
57.1 mm
6Jx15
ET43
195/55R15
Version 4
5x100
57.1 mm
6.5Jx16
ET43
205/45R16
Version 5
5x100
57.1 mm
7Jx17
ET48
205/40R17
Vehicles with the same PCD and centre bore
Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Fabia II without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.
A Skoda Fabia II (2007–2014) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.
Does a Skoda Fabia II need a hub centric ring?
The centre bore (hub diameter) of a Skoda Fabia II is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Skoda Fabia II?
The recorded original offset is ET35 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
Which vehicles have the same PCD as a Skoda Fabia II?
With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Skoda Fabia IV, Skoda Kamiq GT, Skoda Kamiq, Skoda Scala. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more