A Ssang Yong Korando CK (from 2010) uses a 5x112 PCD and a centre bore of 66.6 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Ssang Yong Korando CK without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x112 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.6 mm, and will not fit if it is smaller.
A Ssang Yong Korando CK (from 2010) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.
Does a Ssang Yong Korando CK need a hub centric ring?
The centre bore (hub diameter) of a Ssang Yong Korando CK is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Ssang Yong Korando CK?
The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Ssang Yong Korando CK?
The specified tightening torque is 130 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Ssang Yong Korando CK?
With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Ssang Yong XLV, BMW iX2 U10, BMW X2 U10, BMW I5. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more