FRENES

Ssang Yong Rexton PCD

2001–2006
VERIFIED
⌀84.1
PCD5x130 or 6x139.7
Centre bore102 or 84.1 mm
Offset (ET)ET33 to ET43
Fixing typeM12x1.50
Tightening torque80-120 Nm
Original tyres235/70R17
⚠ This model comes with 5x130 or 6x139.7 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 84.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ssang Yong Rexton

A Ssang Yong Rexton (2001–2006) uses a 5x130 or 6x139.7 PCD and a centre bore of 102 or 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 or 6x139.7 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
  • Offset: the original is ET33 to ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 80-120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/70R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x139.7 102 mm — ET43 —
Version 2 5x130 84.1 mm — ET43 —
Version 3 5x130 84.1 mm — ET33 235/70R17

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ssang Yong Rexton without rings. Offset, width, diameter and caliper clearance still need checking.

Ssang Yong Actyon from 2006 Ssang Yong Kyron 2005–2016 Ssang Yong Rodius from 2005 Mercedes G-Classe W465 from 2024 Volkswagen LT 28,35 2000–2006 Volkswagen LT 28,35,46 1996–2006 Mercedes Spinter 1995–1999 Mercedes Sprinter 1995–2000 Mercedes G-Classe W461 1991–1997 Mercedes G-Classe W463 1990–2024 Mercedes G-Classe W460 1979–1991

Will wheels from another vehicle fit your Rexton?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Ssang Yong Rexton?

A Ssang Yong Rexton (2001–2006) can have a 5x130 or 6x139.7 PCD depending on the version: check on an original wheel.

Does a Ssang Yong Rexton need a hub centric ring?

The centre bore (hub diameter) of a Ssang Yong Rexton is 102 or 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ssang Yong Rexton?

The recorded original offset is ET33 to ET43 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ssang Yong Rexton?

The specified tightening torque is 80-120 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ssang Yong Rexton?

With the same PCD (5x130) and the same centre bore (84.1 mm), these include: Ssang Yong Actyon, Ssang Yong Kyron, Ssang Yong Rodius, Mercedes G-Classe W465. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.