Ssang Yong Musso PCD

1993–2005

VERIFIED

Centre bore110 mm

Offset (ET)ET15

Fixing typeEcrous - 12x1.50

Tightening torque130 Nm

Hub centric rings 110 mm → Wheel spacers 6x139.7(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ssang Yong Musso

A Ssang Yong Musso (1993–2005) uses a 6x139.7 PCD and a centre bore of 110 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x139.7 required. See all vehicles with 6x139.7.
Centre bore: the wheel must have a centre bore of 110 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 110 mm.
Offset: the original is ET15. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 6x139.7 PCD and same 110 mm centre bore: wheels from these vehicles bolt on and centre on a Ssang Yong Musso without rings. Offset, width, diameter and caliper clearance still need checking.

Ssang Yong Korando 1997–2001 Kia Bongo from 2000 Kia Pregio from 2000 Nissan Patrol GR 1997–2010 Isuzu Campo 2WD 1988–2003 Isuzu Campo 4WD 1988–2003 Opel Campo 2WD 1988–2003 Opel Campo 4WD 1988–2003 Isuzu Trooper 1981–1991

Will wheels from another vehicle fit your Musso?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 110 mm, and will not fit if it is smaller.

Ssang Yong Rexton ⌀102 Infiniti QX80 ⌀77.8 Hyundai Staria ⌀92.5 RAM RAM 1500 ⌀77.8 GMC Sierra 1500 ⌀78.1 Holden Colorado ⌀99.5 Lexus GX460 ⌀106 Hyundai H-1 H300 ⌀92.3

Frequently asked questions

What is the PCD of a Ssang Yong Musso?

A Ssang Yong Musso (1993–2005) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.

Does a Ssang Yong Musso need a hub centric ring?

The centre bore (hub diameter) of a Ssang Yong Musso is 110 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ssang Yong Musso?

The recorded original offset is ET15. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ssang Yong Musso?

The specified tightening torque is 130 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ssang Yong Musso?

With the same PCD (6x139.7) and the same centre bore (110 mm), these include: Ssang Yong Korando, Kia Bongo, Kia Pregio, Nissan Patrol GR. Offset, width and rim diameter still need checking for each vehicle.

Other Ssang Yong models

XLV 5x112 Tivoli 5x112 Korando CK 5x112 Actyon 5x130 Kyron 5x130 Rodius 5x130 Rexton 5x130 Korando 6x139.7 All Ssang Yong →

Does a value look wrong, or is a version missing? Let us know, we check every report.