Ssang Yong Rodius PCD

from 2005

VERIFIED

Centre bore84.1 mm

Offset (ET)ET43

Fixing typeM14x1.50

Tightening torque80-120 Nm

Hub centric rings 84.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ssang Yong Rodius

A Ssang Yong Rodius (from 2005) uses a 5x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
Offset: the original is ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 80-120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ssang Yong Rodius without rings. Offset, width, diameter and caliper clearance still need checking.

Ssang Yong Actyon from 2006 Ssang Yong Kyron 2005–2016 Ssang Yong Rexton 2001–2006 Mercedes G-Classe W465 from 2024 Volkswagen LT 28,35 2000–2006 Volkswagen LT 28,35,46 1996–2006 Mercedes Spinter 1995–1999 Mercedes Sprinter 1995–2000 Mercedes G-Classe W461 1991–1997 Mercedes G-Classe W463 1990–2024 Mercedes G-Classe W460 1979–1991

Will wheels from another vehicle fit your Rodius?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 84.1 mm, and will not fit if it is smaller.

Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Maxus EV80 Plus ⌀78.1 Maxus EV80 Pro ⌀78.1 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6 Lamborghini Urus axe arrière ⌀71.6

Frequently asked questions

What is the PCD of a Ssang Yong Rodius?

A Ssang Yong Rodius (from 2005) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Ssang Yong Rodius need a hub centric ring?

The centre bore (hub diameter) of a Ssang Yong Rodius is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ssang Yong Rodius?

The recorded original offset is ET43. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ssang Yong Rodius?

The specified tightening torque is 80-120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ssang Yong Rodius?

With the same PCD (5x130) and the same centre bore (84.1 mm), these include: Ssang Yong Actyon, Ssang Yong Kyron, Ssang Yong Rexton, Mercedes G-Classe W465. Offset, width and rim diameter still need checking for each vehicle.

Other Ssang Yong models

XLV 5x112 Tivoli 5x112 Korando CK 5x112 Actyon 5x130 Kyron 5x130 Rexton 5x130 Korando 6x139.7 Musso 6x139.7 All Ssang Yong →

Does a value look wrong, or is a version missing? Let us know, we check every report.