FRENES

Suzuki S-Cross PCD

2013–2022
VERIFIED
⌀60.1
PCD5x114.3
Centre bore60.1 mm
Offset (ET)ET50
Fixing typeM12x1.50
Tightening torque85 Nm
Original tyres205/60R16, 215/60R16
Hub centric rings 60.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Suzuki S-Cross

A Suzuki S-Cross (2013–2022) uses a 5x114.3 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 85 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16, 215/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 60.1 mm 6Jx16 ET50 205/60R16
Version 2 5x114.3 60.1 mm 6.5Jx16 ET50 215/60R16

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Suzuki S-Cross without rings. Offset, width, diameter and caliper clearance still need checking.

Suzuki Invicto from 2022 Suzuki Across 2020–2025 Suzuki Swace 2020–2026 Suzuki Kizashi 2009–2015 Suzuki Swift Sport 2006–2010 Suzuki SX4 2006–2015 Suzuki Grand Vitara 1998–2005 Suzuki Vitara 1988–1998 BYD Dolphin Plus from 2023 Lexus LBX from 2023 Lexus RZ from 2023 Fisker Ocean from 2022 Subaru Solterra from 2022 Toyota BZ4X from 2022 BYD Atto 3 from 2021 BYD Dolphin from 2021

Will wheels from another vehicle fit your S-Cross?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Suzuki S-Cross?

A Suzuki S-Cross (2013–2022) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Suzuki S-Cross need a hub centric ring?

The centre bore (hub diameter) of a Suzuki S-Cross is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Suzuki S-Cross?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Suzuki S-Cross?

The specified tightening torque is 85 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Suzuki S-Cross?

With the same PCD (5x114.3) and the same centre bore (60.1 mm), these include: Suzuki Invicto, Suzuki Across, Suzuki Swace, Suzuki Kizashi. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.