FRENES

Toyota MR2 PCD

1984–1988
VERIFIED
⌀54.1
PCD4x100 or 5x114.3
Centre bore54.1 or 60.1 mm
Offset (ET)ET35 to ET45
Fixing typeEcrous - 12x1.50
Tightening torque103 Nm
Original tyres185/55R15
⚠ This model comes with 4x100 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota MR2

A Toyota MR2 (1984–1988) uses a 4x100 or 5x114.3 PCD and a centre bore of 54.1 or 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 5x114.3 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET35 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/55R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm — ET35 —
Version 2 5x114.3 60.1 mm — ET45 —
Version 3 4x100 54.1 mm — ET45 185/55R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota MR2 without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Aygo X 2021–2025 Toyota Yaris III 2011–2020 Toyota IQ from 2009 Toyota Aygo 2005–2022 Toyota Yaris II 2005–2011 Toyota Yaris II 17 inch 2005–2011 Toyota Corolla Verso 2002–2004 Toyota BB 2000–2016 Toyota Yaris I 1999–2005 Toyota Yaris Verso 1999–2007 Toyota Prius 1997–2003 Toyota Paseo 1996–2000 Toyota Carina 4 trou 1988–1992 Toyota Corolla 1987–1997 Toyota Starlet 1984–1989 Toyota Tercel 1981–1990

Will wheels from another vehicle fit your MR2?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota MR2?

A Toyota MR2 (1984–1988) can have a 4x100 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Toyota MR2 need a hub centric ring?

The centre bore (hub diameter) of a Toyota MR2 is 54.1 or 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota MR2?

The recorded original offset is ET35 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota MR2?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota MR2?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Toyota Aygo X, Toyota Yaris III, Toyota IQ, Toyota Aygo. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.