Honda Accord CB PCD

1989–1993
VERIFIED
⌀64.1
Centre bore64.1 mm
Offset (ET)ET50
Fixing typeM12x1.5
Tightening torque108 Nm
Original tyres185/70R14, 195/60R15

Fitting wheels on a Honda Accord CB

A Honda Accord CB (1989–1993) uses a 4x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
  • Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/70R14, 195/60R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 64.1 mm 5Jx14 ET50 185/70R14
Version 2 4x114.3 64.1 mm 5.5Jx15 ET50 195/60R15

Will wheels from another vehicle fit your Accord CB?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Honda Accord CB?

A Honda Accord CB (1989–1993) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Honda Accord CB need a hub centric ring?

The centre bore (hub diameter) of a Honda Accord CB is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Accord CB?

The recorded original offset is ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda Accord CB?

The specified tightening torque is 108 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda Accord CB?

With the same PCD (4x114.3) and the same centre bore (64.1 mm), these include: Honda Accord CG/CH, Honda Civic EK 1.8 VTi, Honda Accord CC, Honda Prelude 4 trou. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.