Honda Civic EK 1.8 VTi PCD

1995–2000

VERIFIED

PCD4x114.3

Centre bore64.1 mm

Offset (ET)ET45 to ET55

Fixing typeM12x1.5

Tightening torque108 Nm

Original tyres185/55R15, 195/55R15

1.8 VTi 169 ch seulement

Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Honda Civic EK 1.8 VTi

A Honda Civic EK 1.8 VTi (1995–2000) uses a 4x114.3 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET45 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.5, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/55R15, 195/55R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x114.3	64.1 mm	5.5Jx15	ET55	185/55R15
Version 2	4x114.3	64.1 mm	6Jx15	ET45	195/55R15

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Civic EK 1.8 VTi without rings. Offset, width, diameter and caliper clearance still need checking.

Honda Accord CG/CH 1998–2003 Honda Accord CC 1993–1998 Honda Prelude 4 trou 1992–2000 Honda Accord CB 1989–1993 Honda Legend 1985–1990 Honda Accord 1982–1990 Rover 600-Serie 1993–1999 Rover 800-Serie 1986–1991 Acura Legend 1985–1990

Will wheels from another vehicle fit your Civic EK 1.8 VTi?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Honda Civic EK 1.8 VTi?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Honda Accord CG/CH 1998–2003 Wheels from Honda Accord CC 1993–1998 Wheels from Honda Prelude 4 trou 1992–2000 Wheels from Honda Accord CB 1989–1993

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1 Chevrolet Evanda ⌀56.6

Frequently asked questions

What is the PCD of a Honda Civic EK 1.8 VTi?

A Honda Civic EK 1.8 VTi (1995–2000) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Honda Civic EK 1.8 VTi need a hub centric ring?

The centre bore (hub diameter) of a Honda Civic EK 1.8 VTi is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Honda Civic EK 1.8 VTi?

The recorded original offset is ET45 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Honda Civic EK 1.8 VTi?

The specified tightening torque is 108 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Honda Civic EK 1.8 VTi?

With the same PCD (4x114.3) and the same centre bore (64.1 mm), these include: Honda Accord CG/CH, Honda Accord CC, Honda Prelude 4 trou, Honda Accord CB. Offset, width and rim diameter still need checking for each vehicle.

Other Honda models

CR-V RS 5x120 e:Ny1 5x114.3 ZR-V 5x114.3 Civic Type R FL5 5x120 e:Ns1 5x114.3 Civic FL 5x114.3 e:Np1 5x114.3 HR-V RV 5x114.3 e 5x114.3 Jazz GR 4x100 CR-V RW 5x114.3 Civic FK7 5x114.3 All Honda →

Does a value look wrong, or is a version missing? Let us know, we check every report.