FRENES

Aston Martin V12 Vantage axe avant PCD

2005–2017
VERIFIED
⌀68.1
PCD5x114.3 or 5x128
Centre bore68.1 or 75.1 mm
Offset (ET)ET51
Fixing typeM14x2.00
Tightening torque180 Nm
Original tyres235/40R19, 275/35R21
⚠ This model comes with 5x114.3 or 5x128 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 68.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Aston Martin V12 Vantage axe avant

A Aston Martin V12 Vantage axe avant (2005–2017) uses a 5x114.3 or 5x128 PCD and a centre bore of 68.1 or 75.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 5x128 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 68.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 68.1 mm.
  • Offset: the original is ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x2.00, tightened to 180 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/40R19, 275/35R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 68.1 mm — ET51 235/40R19
Version 2 5x128 75.1 mm — — 275/35R21

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 68.1 mm centre bore: wheels from these vehicles bolt on and centre on a Aston Martin V12 Vantage axe avant without rings. Offset, width, diameter and caliper clearance still need checking.

Aston Martin DBS axe arrière 2007–2012 Aston Martin DBS axe avant 2007–2012 Aston Martin V12 Vantage axe arrière 2005–2017 Aston Martin V8 Vantage 2005–2017 Aston Martin DB9 2003–2016 Lotus Emira back from 2022 Lotus Exige S3 back 2011–2021

Will wheels from another vehicle fit your V12 Vantage axe avant?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Aston Martin V12 Vantage axe avant?

A Aston Martin V12 Vantage axe avant (2005–2017) can have a 5x114.3 or 5x128 PCD depending on the version: check on an original wheel.

Does a Aston Martin V12 Vantage axe avant need a hub centric ring?

The centre bore (hub diameter) of a Aston Martin V12 Vantage axe avant is 68.1 or 75.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Aston Martin V12 Vantage axe avant?

The recorded original offset is ET51 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Aston Martin V12 Vantage axe avant?

The specified tightening torque is 180 Nm for M14x2.00 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Aston Martin V12 Vantage axe avant?

With the same PCD (5x114.3) and the same centre bore (68.1 mm), these include: Aston Martin DBS axe arrière, Aston Martin DBS axe avant, Aston Martin V12 Vantage axe arrière, Aston Martin V8 Vantage. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.