A Aston Martin V8 Vantage (2005–2017) uses a 5x114.3 PCD and a centre bore of 68.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 68.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 68.1 mm.
Offset: the original is ET62. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x2.00, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Vehicles with the same PCD and centre bore
Same 5x114.3 PCD and same 68.1 mm centre bore: wheels from these vehicles bolt on and centre on a Aston Martin V8 Vantage without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your V8 Vantage?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 68.1 mm, and will not fit if it is smaller.
A Aston Martin V8 Vantage (2005–2017) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.
Does a Aston Martin V8 Vantage need a hub centric ring?
The centre bore (hub diameter) of a Aston Martin V8 Vantage is 68.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Aston Martin V8 Vantage?
The recorded original offset is ET62. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Aston Martin V8 Vantage?
The specified tightening torque is 110 Nm for M14x2.00 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Aston Martin V8 Vantage?
With the same PCD (5x114.3) and the same centre bore (68.1 mm), these include: Aston Martin DBS axe arrière, Aston Martin DBS axe avant, Aston Martin V12 Vantage axe arrière, Aston Martin V12 Vantage axe avant. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more