Aston Martin DBS axe avant PCD

2007–2012

VERIFIED

Centre bore68.1 mm

Offset (ET)ET42

Fixing typeEcrous - 14x2.00

Original tyres245/35R20

Hub centric rings 68.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Aston Martin DBS axe avant

A Aston Martin DBS axe avant (2007–2012) uses a 5x114.3 PCD and a centre bore of 68.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 68.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 68.1 mm.
Offset: the original is ET42. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x2.00. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 68.1 mm centre bore: wheels from these vehicles bolt on and centre on a Aston Martin DBS axe avant without rings. Offset, width, diameter and caliper clearance still need checking.

Aston Martin DBS axe arrière 2007–2012 Aston Martin V12 Vantage axe arrière 2005–2017 Aston Martin V12 Vantage axe avant 2005–2017 Aston Martin V8 Vantage 2005–2017 Aston Martin DB9 2003–2016 Lotus Emira back from 2022 Lotus Exige S3 back 2011–2021

Will wheels from another vehicle fit your DBS axe avant?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Aston Martin DBS axe avant?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Aston Martin DBS axe arrière 2007–2012 Wheels from Lotus Emira back from 2022

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 68.1 mm, and will not fit if it is smaller.

Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1 Renault 5 E-Tech ⌀66.1

Frequently asked questions

What is the PCD of a Aston Martin DBS axe avant?

A Aston Martin DBS axe avant (2007–2012) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Aston Martin DBS axe avant need a hub centric ring?

The centre bore (hub diameter) of a Aston Martin DBS axe avant is 68.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Aston Martin DBS axe avant?

The recorded original offset is ET42. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Aston Martin DBS axe avant?

With the same PCD (5x114.3) and the same centre bore (68.1 mm), these include: Aston Martin DBS axe arrière, Aston Martin V12 Vantage axe arrière, Aston Martin V12 Vantage axe avant, Aston Martin V8 Vantage. Offset, width and rim diameter still need checking for each vehicle.

Other Aston Martin models

Valour axe arrière 5x128 Valour axe avant 5x128 DBX axe arrière 5x128 DBX axe avant 5x128 Vantage axe avant 5x128 DBS Volante axe arrière 5x128 DBS Volante axe avant 5x128 Rapide AMR axe arrière 5x128 Rapide AMR axe avant 5x128 Vantage axe arrière 5x128 Rapide S axe arrière 5x128 Rapide S axe avant 5x128 All Aston Martin →

Does a value look wrong, or is a version missing? Let us know, we check every report.