Chevrolet Bel Air PCD

1955–1970

VERIFIED

Centre bore70.3 or 78.1 mm

Fixing type-

Tightening torque100 Nm

⚠ This model comes with 5x120.65 or 5x127 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 70.3 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Bel Air

A Chevrolet Bel Air (1955–1970) uses a 5x120.65 or 5x127 PCD and a centre bore of 70.3 or 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 or 5x127 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Fixings: thread -, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	5x120.65	70.3 mm	—	—	—
Version 2	5x127	78.1 mm	—	—	—

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Bel Air without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Corvette C7 2013–2019 Chevrolet Corvette C6 2004–2013 Chevrolet Jimny from 1998 Chevrolet Corvette C5 1997–2004 Chevrolet Blazer 2WD 1986–2004 Chevrolet Blazer 4WD 1986–2004 Chevrolet Corvette C4 1984–1996 Chevrolet S10 1982–1993 Chevrolet Caprice 1971–1977 Chevrolet Camaro 1969–1982 Chevrolet Monte Carlo 1969–1981 Chevrolet Corvette C3 1968–1982 Chevrolet Chevelle 1964–1977 Chevrolet Malibu 1964–1983 Chevrolet Nova 1964–1981 Chevrolet El Camino 1959–1987

Will wheels from another vehicle fit your Bel Air?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Cadillac CTS-V ⌀67.1 Cadillac CTS ⌀67.1 Jaguar XK ⌀73.8 Aston Martin DB7 ⌀74.1 Aston Martin Virage ⌀73.9 Aston Martin Lagonda ⌀73.9 Jaguar XJ ⌀74

Frequently asked questions

What is the PCD of a Chevrolet Bel Air?

A Chevrolet Bel Air (1955–1970) can have a 5x120.65 or 5x127 PCD depending on the version: check on an original wheel.

Does a Chevrolet Bel Air need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Bel Air is 70.3 or 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What tightening torque for the wheels of a Chevrolet Bel Air?

The specified tightening torque is 100 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Bel Air?

With the same PCD (5x120.65) and the same centre bore (70.3 mm), these include: Chevrolet Corvette C7, Chevrolet Corvette C6, Chevrolet Jimny, Chevrolet Corvette C5. Offset, width and rim diameter still need checking for each vehicle.

Other Chevrolet models

Corvette C8 5x120 Bolt EV 5x105 Spark M400 4x100 Trax 5x105 Corvette C7 5x120.65 Volt 5x115 Aveo 4 trou 4x100 Aveo 5 trou 5x105 Orlando 5x115 Silverado 2500 8x180 Spark M300 4x100 Cruze Essence 5x105 All Chevrolet →

Does a value look wrong, or is a version missing? Let us know, we check every report.