FRENES

Chrysler Pacifica PCD

2004–2008
VERIFIED
⌀71.6
PCD5x127
Centre bore71.6 or 71.5 mm
Offset (ET)ET51
Fixing typeEcrous - 12x1.50
Tightening torque135 Nm
Original tyres235/65R17, 235/60R18
Hub centric rings 71.6 mm → Wheel spacers 5x127(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chrysler Pacifica

A Chrysler Pacifica (2004–2008) uses a 5x127 PCD and a centre bore of 71.6 or 71.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x127 required. See all vehicles with 5x127.
  • Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
  • Offset: the original is ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17, 235/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x127 71.6 mm — ET51 235/65R17
Version 2 5x127 71.5 mm — ET51 235/60R18

Vehicles with the same PCD and centre bore

Same 5x127 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Chrysler Pacifica without rings. Offset, width, diameter and caliper clearance still need checking.

Chrysler Town and Country 2001–2007 Chrysler Grand Voyager 2000–2007 Chrysler Voyager 1991–2000 Jeep Cherokee 2014–2024 Dodge Journey 2008–2011 Dodge Charger 2006–2023 Jeep Commander 2006–2010 Dodge Grand Caravan 2001–2007 Jeep Wrangler 1987–2006 Jeep Grand Cherokee 1984–1999

Will wheels from another vehicle fit your Pacifica?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chrysler Pacifica?

A Chrysler Pacifica (2004–2008) has a PCD of 5x127: 5 studs or bolts spaced around a circle 127 mm in diameter.

Does a Chrysler Pacifica need a hub centric ring?

The centre bore (hub diameter) of a Chrysler Pacifica is 71.6 or 71.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chrysler Pacifica?

The recorded original offset is ET51 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chrysler Pacifica?

The specified tightening torque is 135 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chrysler Pacifica?

With the same PCD (5x127) and the same centre bore (71.6 mm), these include: Chrysler Town and Country, Chrysler Grand Voyager, Chrysler Voyager, Jeep Cherokee. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.