FRENES

Chrysler Sebring PCD

1995–2007
VERIFIED
⌀57.1
PCD5x100 or 5x114.3
Centre bore57.1 or 67.1 mm
Offset (ET)ET40 to ET42
Fixing typeEcrous - 12x1.50
Tightening torque135 Nm
⚠ This model comes with 5x100 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chrysler Sebring

A Chrysler Sebring (1995–2007) uses a 5x100 or 5x114.3 PCD and a centre bore of 57.1 or 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 or 5x114.3 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET40 to ET42. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 135 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm — ET42 —
Version 2 5x114.3 67.1 mm — ET40 —

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Chrysler Sebring without rings. Offset, width, diameter and caliper clearance still need checking.

Chrysler PT Cruiser 2000–2010 Chrysler Stratus 1995–2000 Chrysler Neon 1994–2005 Chrysler Le Baron 1987–1995 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Audi A1 Citycarver 2019–2022 Skoda Kamiq from 2019 Skoda Scala from 2019 Volkswagen T-Cross from 2019 Seat Arona from 2017 Seat Ibiza V from 2017 Volkswagen Polo AW from 2017 Audi S1 2014–2018

Will wheels from another vehicle fit your Sebring?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chrysler Sebring?

A Chrysler Sebring (1995–2007) can have a 5x100 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Chrysler Sebring need a hub centric ring?

The centre bore (hub diameter) of a Chrysler Sebring is 57.1 or 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chrysler Sebring?

The recorded original offset is ET40 to ET42 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chrysler Sebring?

The specified tightening torque is 135 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chrysler Sebring?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Chrysler PT Cruiser, Chrysler Stratus, Chrysler Neon, Chrysler Le Baron. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.