FRENES

Citroen Jumper II Heavy PCD

from 2006
VERIFIED
⌀78.1
PCD5x130
Centre bore78.1 mm
Offset (ET)ET68
Fixing typeM16x1.5
Original tyres215/75R16, 225/75R16
Versions Heavy (35) et ë-Jumper. Les versions 30/33 sont en 5x118.
Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Citroen Jumper II Heavy

A Citroen Jumper II Heavy (from 2006) uses a 5x130 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
  • Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M16x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/75R16, 225/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x130 78.1 mm 6Jx16 ET68 215/75R16
Version 2 5x130 78.1 mm 6Jx16 ET68 225/75R16

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Citroen Jumper II Heavy without rings. Offset, width, diameter and caliper clearance still need checking.

Citroen Jumper Maxi 1994–2006 Citroen Relay Maxi 1994–2006 Maxus EV80 Plus from 2022 Maxus EV80 Pro from 2022 Maxus EV80 2015–2023 RAM Promaster from 2013 Laika X650R 2007–2014 Laika X660R 2007–2014 Fiat Ducato III Maxi from 2006 Peugeot Boxer Maxi from 2006 Fiat Ducato Maxi 1994–2006

Will wheels from another vehicle fit your Jumper II Heavy?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Citroen Jumper II Heavy?

A Citroen Jumper II Heavy (from 2006) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Citroen Jumper II Heavy need a hub centric ring?

The centre bore (hub diameter) of a Citroen Jumper II Heavy is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Citroen Jumper II Heavy?

The recorded original offset is ET68 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Citroen Jumper II Heavy?

With the same PCD (5x130) and the same centre bore (78.1 mm), these include: Citroen Jumper Maxi, Citroen Relay Maxi, Maxus EV80 Plus, Maxus EV80 Pro. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.