Laika X660R PCD

2007–2014

VERIFIED

Centre bore78.1 mm

Offset (ET)ET68

Fixing typeM16x1.50

Original tyres205/70R15

Hub centric rings 78.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Laika X660R

A Laika X660R (2007–2014) uses a 5x130 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M16x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/70R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Laika X660R without rings. Offset, width, diameter and caliper clearance still need checking.

Laika X650R 2007–2014 Maxus EV80 Plus from 2022 Maxus EV80 Pro from 2022 Maxus EV80 2015–2023 RAM Promaster from 2013 Peugeot Boxer Maxi from 2006 Citroen Jumper Maxi 1994–2006 Citroen Relay Maxi 1994–2006 Fiat Ducato Maxi 1994–2006

Will wheels from another vehicle fit your X660R?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Laika X660R?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Laika X650R 2007–2014

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6 Lamborghini Urus axe arrière ⌀71.6 Lamborghini Urus axe avant ⌀71.6

Frequently asked questions

What is the PCD of a Laika X660R?

A Laika X660R (2007–2014) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Laika X660R need a hub centric ring?

The centre bore (hub diameter) of a Laika X660R is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Laika X660R?

The recorded original offset is ET68. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Laika X660R?

With the same PCD (5x130) and the same centre bore (78.1 mm), these include: Laika X650R, Maxus EV80 Plus, Maxus EV80 Pro, Maxus EV80. Offset, width and rim diameter still need checking for each vehicle.

Other Laika models

Kosmo V5 5x118 Kosmo V9 5x118 X650R 5x130 All Laika →

Does a value look wrong, or is a version missing? Let us know, we check every report.