Fiat Ducato Maxi PCD

1994–2006

VERIFIED

Centre bore78.1 mm

Offset (ET)ET68

Fixing typeM16x1.50

Tightening torque160 Nm

Hub centric rings 78.1 mm → Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fiat Ducato Maxi

A Fiat Ducato Maxi (1994–2006) uses a 5x130 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x130 required. See all vehicles with 5x130.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M16x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 78.1 mm centre bore: wheels from these vehicles bolt on and centre on a Fiat Ducato Maxi without rings. Offset, width, diameter and caliper clearance still need checking.

Maxus EV80 Plus from 2022 Maxus EV80 Pro from 2022 Maxus EV80 2015–2023 RAM Promaster from 2013 Laika X650R 2007–2014 Laika X660R 2007–2014 Peugeot Boxer Maxi from 2006 Citroen Jumper Maxi 1994–2006 Citroen Relay Maxi 1994–2006

Will wheels from another vehicle fit your Ducato Maxi?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Mercedes G-Classe W465 ⌀84.1 Bugatti Centodieci ⌀71.6 Bugatti Mistral ⌀71.6 Faw - Hongqi E-HS9 ⌀71.6 Porsche Taycan ⌀71.6 Bugatti Divo ⌀71.6 Lamborghini Urus axe arrière ⌀71.6 Lamborghini Urus axe avant ⌀71.6

Frequently asked questions

What is the PCD of a Fiat Ducato Maxi?

A Fiat Ducato Maxi (1994–2006) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Fiat Ducato Maxi need a hub centric ring?

The centre bore (hub diameter) of a Fiat Ducato Maxi is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fiat Ducato Maxi?

The recorded original offset is ET68. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Fiat Ducato Maxi?

The specified tightening torque is 160 Nm for M16x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Fiat Ducato Maxi?

With the same PCD (5x130) and the same centre bore (78.1 mm), these include: Maxus EV80 Plus, Maxus EV80 Pro, Maxus EV80, RAM Promaster. Offset, width and rim diameter still need checking for each vehicle.

Other Fiat models

Topolino 4x108 600 4x108 600E 4x108 e-Doblo 5x98 Talento 5x114.3 124 Spider 4x100 500X 5x110 500e 4x98 500L Trekking 5x98 Panda III 4x98 500L 5x98 Freemont 5x127 All Fiat →

Does a value look wrong, or is a version missing? Let us know, we check every report.