Hyundai Genesis PCD

from 2008

VERIFIED

Centre bore67.1 mm

Offset (ET)ET33

Fixing typeEcrous - 12x1.50

Original tyres225/45R18

Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Hyundai Genesis

A Hyundai Genesis (from 2008) uses a 5x114.3 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/45R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Hyundai Genesis without rings. Offset, width, diameter and caliper clearance still need checking.

Hyundai IONIQ 6 from 2022 Hyundai Stargazer from 2022 Hyundai IONIQ 5 from 2021 Hyundai IONIQ 5 N from 2021 Hyundai Tucson IV from 2020 Hyundai Nexo from 2018 Hyundai i30 III from 2017 Hyundai Kona 2017–2022 Hyundai Ioniq 2016–2023 Hyundai Tucson III 2015–2020 Hyundai i40 from 2011 Hyundai Veloster 2011–2017 Hyundai ix20 from 2010 Hyundai ix35 from 2010 Hyundai ix55 from 2009 Hyundai i30 I 2007–2012

Will wheels from another vehicle fit your Genesis?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Hyundai Genesis?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Hyundai IONIQ 6 from 2022 Wheels from Hyundai Tucson IV from 2020 Wheels from Hyundai Kona 2017–2022 Wheels from Hyundai i30 III from 2017

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.

Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Leapmotor C10 ⌀73.1 Renault 5 E-Tech ⌀66.1 Renault Grand Kangoo ⌀66.1 Renault Rafale ⌀66.1 Renault Symbioz ⌀66.1

Frequently asked questions

What is the PCD of a Hyundai Genesis?

A Hyundai Genesis (from 2008) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Hyundai Genesis need a hub centric ring?

The centre bore (hub diameter) of a Hyundai Genesis is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Hyundai Genesis?

The recorded original offset is ET33. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Hyundai Genesis?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Hyundai IONIQ 6, Hyundai Stargazer, Hyundai IONIQ 5, Hyundai IONIQ 5 N. Offset, width and rim diameter still need checking for each vehicle.

Other Hyundai models

Inster 4x100 Stargazer 5x114.3 IONIQ 6 5x114.3 Staria 6x139.7 Bayon 4x100 IONIQ 5 N 5x114.3 IONIQ 5 5x114.3 i20 III 4x100 Tucson IV 5x114.3 i10 III 4x100 Nexo 5x114.3 i30 III 5x114.3 All Hyundai →

Does a value look wrong, or is a version missing? Let us know, we check every report.