Mazda Demio PCD

1998–2003

VERIFIED

Centre bore54.1 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Tightening torque103 Nm

Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda Demio

A Mazda Demio (1998–2003) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda Demio without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda Mazda2 from 2015 Mazda 2 2003–2007 Mazda MX-3 1991–1999 Mazda MX-5 1990–2005 Mazda 323 4 gaatts 1989–2004 Mazda 121 1988–1991 Hyundai Inster from 2024 Hyundai Bayon from 2021 Toyota Aygo X 2021–2025 Hyundai i20 III from 2020 Hyundai i10 III from 2019 Kia Picanto III from 2017 Kia Stonic from 2017 Fiat 124 Spider from 2015 Suzuki Alivio 2015–2021 Suzuki Celerio 2015–2021

Will wheels from another vehicle fit your Demio?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 54.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Dacia Sandero III ⌀60.1 Leapmotor T03 ⌀50 Renault Clio 5 ⌀60.1 Honda WR-V ⌀56.1

Frequently asked questions

What is the PCD of a Mazda Demio?

A Mazda Demio (1998–2003) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Mazda Demio need a hub centric ring?

The centre bore (hub diameter) of a Mazda Demio is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda Demio?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda Demio?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mazda Demio?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Mazda Mazda2, Mazda 2, Mazda MX-3, Mazda MX-5. Offset, width and rim diameter still need checking for each vehicle.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.