Mazda 121 PCD

1988–1991

VERIFIED

Centre bore59.6 or 54.1 or 63.4 mm

Offset (ET)ET43 to ET45

Fixing typeEcrous - 12x1.50

Tightening torque103 Nm

Original tyres155/70R13

⚠ This model comes with 4x114.3 or 4x100 or 4x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 59.6 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda 121

A Mazda 121 (1988–1991) uses a 4x114.3 or 4x100 or 4x108 PCD and a centre bore of 59.6 or 54.1 or 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 or 4x100 or 4x108 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 59.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 59.6 mm.
Offset: the original is ET43 to ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 155/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x114.3	59.6 mm	—	ET43	—
Version 2	4x100	54.1 mm	—	ET45	—
Version 3	4x108	63.4 mm	—	ET43	155/70R13

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 59.6 mm centre bore: wheels from these vehicles bolt on and centre on a Mazda 121 without rings. Offset, width, diameter and caliper clearance still need checking.

Mazda 626 1979–1982 Mazda RX-7 1979–1983 Mazda 323 1977–1980 Mazda 929 1973–1981

Will wheels from another vehicle fit your 121?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mazda 121?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Ford Courier 1995–2000 Wheels from Ford Orion 1983–1990 Wheels from Ford Escort 1980–1985 Wheels from Ford Fiesta MK1 1976–1983

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 59.6 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1 Chevrolet Evanda ⌀56.6

Frequently asked questions

What is the PCD of a Mazda 121?

A Mazda 121 (1988–1991) can have a 4x114.3 or 4x100 or 4x108 PCD depending on the version: check on an original wheel.

Does a Mazda 121 need a hub centric ring?

The centre bore (hub diameter) of a Mazda 121 is 59.6 or 54.1 or 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda 121?

The recorded original offset is ET43 to ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda 121?

The specified tightening torque is 103 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mazda 121?

With the same PCD (4x114.3) and the same centre bore (59.6 mm), these include: Mazda 626, Mazda RX-7, Mazda 323, Mazda 929. Offset, width and rim diameter still need checking for each vehicle.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.