A Pontiac Phoenix (1977–1979) uses a 5x120.65 PCD and a centre bore of 70.3 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Vehicles with the same PCD and centre bore
Same 5x120.65 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Pontiac Phoenix without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Phoenix?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.
A Pontiac Phoenix (1977–1979) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.
Does a Pontiac Phoenix need a hub centric ring?
The centre bore (hub diameter) of a Pontiac Phoenix is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
Which vehicles have the same PCD as a Pontiac Phoenix?
With the same PCD (5x120.65) and the same centre bore (70.3 mm), these include: Pontiac Firebird, Pontiac Trans Am, Pontiac Catalina, Pontiac Grand Am. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more