Pontiac Tempest PCD

1964–1986

VERIFIED

Centre bore70.3 mm

Fixing type-

Hub centric rings 70.3 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Pontiac Tempest

A Pontiac Tempest (1964–1986) uses a 5x120.65 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Pontiac Tempest without rings. Offset, width, diameter and caliper clearance still need checking.

Pontiac Firebird 1982–1992 Pontiac Trans Am 1982–1992 Pontiac Phoenix 1977–1979 Pontiac Catalina 1971–1976 Pontiac Grand Am 1964–1980 Pontiac GTO 1964–1974 Chevrolet Corvette C7 2013–2019 Chevrolet Corvette C6 2004–2013 Cadillac XLR 2003–2009 Chevrolet Jimny from 1998 Chevrolet Corvette C5 1997–2004 Chevrolet Blazer 2WD 1986–2004 Chevrolet Blazer 4WD 1986–2004 Chevrolet Corvette C4 1984–1996 Chevrolet S10 1982–1993 Buick Apollo 1977–1985

Will wheels from another vehicle fit your Tempest?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Cadillac CTS-V ⌀67.1 Cadillac CTS ⌀67.1 Jaguar XK ⌀73.8 Aston Martin DB7 ⌀74.1 Aston Martin Virage ⌀73.9 Aston Martin Lagonda ⌀73.9 Jaguar XJ ⌀74

Frequently asked questions

What is the PCD of a Pontiac Tempest?

A Pontiac Tempest (1964–1986) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Pontiac Tempest need a hub centric ring?

The centre bore (hub diameter) of a Pontiac Tempest is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

Which vehicles have the same PCD as a Pontiac Tempest?

With the same PCD (5x120.65) and the same centre bore (70.3 mm), these include: Pontiac Firebird, Pontiac Trans Am, Pontiac Phoenix, Pontiac Catalina. Offset, width and rim diameter still need checking for each vehicle.

Other Pontiac models

G8 5x120 Torrent 5x115 G5 5x110 Solstice 5x110 G6 5x110 Vibe 5x100 Montana 5x115 Sunfire 5x100 Trans Sport 5x115 Bonneville 5x115 Sunbird 5x100 Fiero 5x100 5x100 All Pontiac →

Does a value look wrong, or is a version missing? Let us know, we check every report.